提高定制产品物料需求预测的准确性

提高定制产品物料需求预测准确性是提高企业竞争能力的必由之路。通过某公司提高定制产品物料需求预测准确性的具体项目实践，介绍了关于提高物料需求预测准确性的具体措施。通过建立一种能为各部门所共同接受的产品语言来加强各部门的信息交流，并减少从客户的实际需求到物料预测之间的中间环节来提高整个物料预测的准确性，并以实例验证其有效性。     

套管钻井用套管外表面磨损后剩余强度分析

在分析讨论套管钻井管柱磨损形态的基础上,结合API5C5实物试验尺寸要求,通过有限元计算分析方法,对钻井套管完钻后含有外表面磨损缺陷的套管柱的极限剩余抗挤强度和极限剩余抗拉强度进行了研究,分别获得了均匀磨损和偏磨条件下,套管钻井套管柱外表面磨损缺陷的临界长度尺寸数值,以及不同破坏失效准则条件下的剩余抗挤强度和剩余抗拉强度的计算方程,为套管钻井中套管柱的设计、计算奠定了理论基础。     

A Profile of Psychologists' Views of Critical Risk Factors for Completed Suicide in Older Adults.

The ability to accurately and reliably predict whether an older adult will commit suicide has eluded clinicians and researchers. A random national sample of psychologists who work with older adults was surveyed regarding their perception of 36 risk factors for completed suicide and indirect self-destructive behavior in older adults. This study produced a profile of psychologists' assessment and treatment practices when working with suicidal older adults. Determining what psychologists consider to be the most salient risk factors for completed suicide is important in identifying a minimum standard that clinicians should follow when assessing older adults. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Convolutional solutions of partial difference equations

A significant part of the theory of one-dimensional linear shift-invariant systems is based on the concept of weighting function (or impulse response): the output is the convolution of the weighting function with the input. This paper introduces the concept of linear translation-invariant systems and uses this notion in studying impulse response, z-transforms, and transfer functions for multidimensional systems.     

SF6气体绝缘电容式电压互感器研制

本文介绍西容公司新研制的一种完全无油化的SF6气体绝缘电容式电压互感器,提出了关键技术问题解决方案和产品绝缘结构的设计思路.并介绍了研制成功的110kV和220kV系列产品的结构、技术参数、性能指标、试验考核情况和产品特点.     

梯恩梯-吉纳、地恩梯-太安装药体系自旋爆轰特性的研究

本文研究了梯恩梯-吉纳(TNT-DINA)和地恩梯-太安(DNT-PETN)体系的自旋爆轰现象,爆轰波是以低频脉冲方式传播.这些体系具有的爆速、爆热分别为DJ=7.3～7.4km/s和Qv=(5.40±0.01)MJ/kg.不同组成的爆速和爆压PJ通过SW程序计算.用扩散区的爆压P3和爆温T3来评估爆轰波的衰减和重新点火.敏化剂含量相同,梯恩梯-黑索金(TNT-RDX)体系的爆压PJ大于TNT-DINA的爆压,TNT-RDX体系的温度T3比TNT-DINA高60～100K.计算值与实验结果吻合较好.     

基于i860的存储器子系统设计

微处理机系统中的存储器子系统设计对整个系统性能的高低有重要的影响，尤其当微处理器的主频越来越高时。本文结合实际例子，给出了一个基于ｉ８６０处理器（４０ＭＨｚ）的主存设计方案，讨论了实际中需仔细考虑的因素。该设计可为其它高性能ＲＩＳＣ系统设计提供参考。     

High-temperature,high-pressure thermophysical measurements on liquid zinc

Wire-shaped zinc samples were resistively volume heated as part of a fast-capacitor discharge circuit. Time-resolved measurements with submicrosecond resolution of the current through the specimen, the voltage drop across it, and the thermal expansion of the specimen as a function of time allow determination of the enthalpy, electrical resistivity, and density at different temperatures up to superheated liquid states of zinc far above the normal boiling point. High static pressures, up to 3800 bar of the ambient medium water, were used. An estimate of the critical pressure for zinc is given by investigations of the stability of the sample with a framing CCD camera, taking pictures of different samples varying the ambient static pressure. The critical volume and the critical temperature are obtained by means of an extrapolation of measured data at different pressures.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1995, Köln, Germany.     

不含4圈的最大简单图边数的下界

证明了具有不小于6个顶点的不包含4圈的简单图的最大可能边数的下界是2n-5。     

Effect of processing history on the properties of Ag-based tapes

The Bi-system tapes and coils were prepared by the powder-in-tube method. The effect of processing and heat treatment on the properties of the tapes and coils was studied. It is found that the shearing stress produced by the rolling process may destroy the 2223 phase, and the destroyed 2223 phase cannot be recovered by heat treatment, whereas the pressing stress produced by the uniaxial pressing process only makes the 2223 phase grains break, and the broken 2223 phase can be closed by the heat treatment. TheJ _c values of the rolling samples, pressing sample, and the coil with a diameter of 35 mm are over 1.3×10⁴, 2.5×10⁴, and 4×10³ A/cm² (77 K, 0 T), respectively.